lr1a1300 - LR1A1300 Liquid Ring Pump

LR1A1300 Liquid Ring Pump

LR1A1300

Overview

Edwards offers a full range of liquid ring pumps. The LR1A1300 provides a single-stage design and curved blade impellor with reinforcing rings for improved ruggedness, reducing noise and vibration.
 
All of our liquid ring pumps handle wet or dry gases, with high tolerance to liquid carry over. The LR1A Series has an enhanced bearing design enabling reduced internal clearances for improved efficiency. Pumps are available in cast iron and 316 stainless steel construction as standard with other materials and corrosion resistant coatings available.





All are tested to DIN 28431:1987 and are available as part of ATEX Category 1 and 2 T4 systems.
 
The LR1A1300 is a bare-shaft machine and can be supplied as part of a standard package, incorporating electric motor, base-plate and seal liquid recovery system, suitable for once through, partial or total recirculation. Custom engineered packages are also available, please contact your local office for more complex process system requirements.

Applications

  • The LR1A1300 is ideal for condenser evacuation, pulp and paper, filtration, vacuum forming and chemical and petrochemical applications.

Features and Benefits

  • Optional central partition enabling dual vacuum duty operation
  • Variable area discharge port for optimum performance at all inlet pressures
  • Packed gland, single and double mechanical seal options
  • Split packing gland design to facilitate repacking
  • Internal and external seal flushing options
  • Internal recirculation option to reduce service liquid flow rate
  • Optional inlet manifold and top-mounted separator to reduce footprint

Technical Data

  50 Hz 60 Hz
Nominal capacity (saturated) 1200 m3h-1 1400 m3h-1

700 CFM 850 CFM
Suction pressure 33 mbar 33 mbar

25 Torr 25 Torr
Nominal speed 980 rpm 1170 rpm
Nominal motor power 37 kW 45 kW

50 HP 60 HP

Performance

Dimensions


A (keyway) B C D E F G
mm 54 82 227 551 1131 985 315
Inch 2.13 3.23 8.94 21.70 44.53 38.78 12.40

H J L M N K
mm 340 430 840 155 155 4 holes Ø 24
Inch 13.39 16.93 33.07 6.10 6.10 0.94

1. DN125 / PN10

    2. DN100 / PN10

    3. Outlet

    4. Inlet


*Flanges available in both DIN and ANSI standards