lr1a12000 - LR1A12000 Liquid Ring Pump

LR1A12000 Liquid Ring Pump



Edwards offers a full range of liquid ring pumps. The LR1A12000 provides a single-stage design and curved blade impellor with reinforcing rings for improved ruggedness, reducing noise and vibration.
All of our liquid ring pumps handle wet or dry gases, with high tolerance to liquid carry over. The LR1A Series has an enhanced bearing design enabling reduced internal clearances for improved efficiency. Pumps are available in cast iron and 316 stainless steel construction as standard with other materials and corrosion resistant coatings available.

The LR1A12000 is a bare-shaft machine and can be supplied as part of a standard package, incorporating electric motor, base-plate and seal liquid recovery system, suitable for once through, partial or total recirculation. Custom engineered packages are also available, please contact your local office for more complex process system requirements.


  • The LR1A12000 is ideal for condenser evacuation, pulp and paper, filtration, flue gas desulphurization, vacuum forming and chemical and petrochemical applications.

Features and Benefits

  • Optional central partition enabling dual vacuum duty operation
  • Variable area discharge port for optimum performance at all inlet pressures
  • Flange-mounted casing construction for extra rigidity
  • Top and side inlet/outlet flange options for installations with limited headroom
  • Packed gland, single and double mechanical seal options
  • Split packing gland design to facilitate repacking
  • Internal and external seal flushing options
  • Internal recirculation option to reduce service liquid flow rate
  • Optional inlet manifold and top-mounted separator to reduce footprint

Technical Data

  50 Hz / 60 Hz
Nominal capacity (saturated) 11700 m3h-1

6900 CFM
Suction pressure 33 mbar

25 Torr
Nominal speed 470 rpm
Nominal motor power 315 kW

450 HP



A (keyway) B C D E F G H J
mm 169 375 1270 2255
1460 2160 775 1120
Inch 6.65 14.76 50.0 88.78
57.49 85.04 30.51 44.09

mm 858 215 800 1875 385 385 285 4 holes Ø 42
Inch 33.78 8.46 31.50 73.82 15.16 15.16 11.22 1.65

1. DN350 / PN10

     2. DN300 / PN10

     3. DN150 / PN10

     4. Outlet

     5. Inlet

*Flanges available in both DIN and ANSI standards