CDX1000 Dry Vacuum Pump, 30kW, 50 Hz, Flame Proof (without Integral Flame Arrestors)

Edwards CDX1000 represents the next generation of dry pump technology. The CDX1000 is a double ended mechanism for the chemical process, pharmaceutical and petrochemical industries.
 
This innovative technology leverages Edwards latest manufacturing and design philosophies. The CDX1000 is suited to larger processes where repeatability and reliability are key. Technologies and manufacturing techniques have been carefully selected to produce a robust, high performance machine that is simple to operate and maintain.

Performance with Reliability 

• Outstanding temperature control with Edwards standard indirect cooling
  • Process repeatability
  • Protects pump from thermal shock and corrosion
• Excellent liquid handling
  • No compression plate = no hydraulic lock
  • Self draining mechanism
• Dust and particulate tolerant
  • No expansion volumes
  • No cold seizures
• Extended maintenance period
  • Cooled and filtered oil system
• No complex controls
  • Direct on-line start

Simple, Rugged Design
A robust mechanism for reliable, repeatable performance 

• Double-ended, variable pitch screw
• Patented stator machining removes the need for a head plate
• No compression plate
• Minimal parts count
• Standard motors
• No coatings
• Low rotational speed

Maintainability
The CDX1000 is designed to minimize scheduled down-time from line maintenance to overhaul. 

• Minimized process line disturbance
  • Integral flame arrestors can be cleaned and inspected without breaking process lines
  • Silencers are drainable and cleanable
• Standard automotive style oil filters
• Bearing and seal change is possible on-site
• Recovery philosophy minimizes pump removal
  • Clearances open up on cooling; no cold seizures
• Rotors do not require costly re-coating
• Rotors are not assembled as matched pairs

Cool & Clean
The bearings and rotor stub shafts are fed cooled, filtered oil. Limiting the oil temperature prevents carburization and degradation.  

• Extended bearing and seal life

Systemization Tailored To Match Your Process Needs 

• Low cost, pre-engineered modules
• Customized systems
• Tailored applications support
  • Avoid problems
  • Solve issues if they arise
• Applicable to a wide range of processes
  • Match performance to process
  • Monitoring and control options
  • Dust, hard particle and liquid carry-over protection

• Processes
• Distillation
• Drying
• Evaporation/Crystallisation
• Solvent/Vapour Recovery
• Filtration
• Sterilisation
• Central/House Vacuum
• Industries
• Plastics
• Fatty Acids, Alcohols and Amines
• Adhesives, Paints and Coatings
• Medical (Ethylene Oxide)
• Edible Oils
• Silicones
• Basic Chemicals

• Continuous performance from atmospheric pressures to ultimate vacuum
• Excellent temperature control
• Large liquid slug capabilities
• No effluent generated
• Dry running mechanism
• Efficient solvent recovery
• Low power consumption
• On site seal and bearing change
• Flushable with water, solvent or steam
• Low rotational speed
• Cooled and filtered oil
• Integral accessory modules
• Low parts count
• Balanced rotor design
• No compressor plate
• Industry standard motors fitted throughout range

Maximum pumping speed	900 m3h-1
	530 ft3min-1
Capacity at 10 mbar (7.5 Torr)	900 m3h-1
	530 ft3min-1
Ultimate vacuum	5 x 10-3 mbar
	4 x 10-3 Torr
Maximum back pressure - standard (optional*)	1150 mbarA
	2.0 psig
Power consumption at 10 mbar (7.5 Torr)	17.1 kW
	23.2 Hp
Standard motor (380 - 400V, 3 ph, 50 Hz)	30 kW
Standard motor (200 - 460V, 3 ph, 60 Hz)	40 hp
Cooling water flow rate (adjustable)	10 – 20 lmin-1
	2.64 - 5.28 galmin-1
Cooling water supply temperature range	5 - 35 oC / 41 - 95 oF
Cooling water supply pressure	2 – 10 barg
	29 – 145 psig
Seal purge flow (maximum), regulated to 0.3 - 0.5 barg, (5 - 7 psig)	24 l min-1
	0.85 ft3min-1
Seal purge supply pressure (minimum - maximum)	2 – 10 barg
	29 – 145 psig
Noise (max. with exhaust silencer)	82 dB(A)
Weight (with frame and standard motor)	1710 kg
	3765 lbs
Process connection, inlet	6” ANSI/DN150
Process connection, outlet	3” ANSI/DN80
Pumping mechanism

 
* Consult Edwards