GXS750/2600F 380 - 460 V, Medium Duty, Rear Exhaust

The competitive nature of today’s business means changes are required to improve performance, lower costs, and provide optimal process solutions. The dry pumping solution is the change from traditional oil sealed pumps to a proven technology for this industry. Edwards, a world leader in dry pump technology, has demonstrated the ability to provide a low-cost, tailored solution to your vacuum application.

• Solar
• Freeze drying
• Sterilisation
• Coating
• Metallurgy
• Leak detection
• Food packaging
• Vacuum chamber evacuation
• High purity gas cylinder filling

Maintenance 
-  Low capital cost and minimal maintenance requirements lead to lowest cost of ownership. 
-  Extended periods between user intervention. 
-  Lower consumable costs. 

Environmental 
-  No oil disposal. 
-  No oil emissions into atmosphere. 

Performance 
-  Very stable pumping speed gives repeatability to processes. 
-  Continuous pumping at atmosphere. 
-  Ability to handle particulates. 
-  Dry eliminates back-streaming, thus protecting reactive alloys from contamination. 

Safety 
-  Unobtrusive noise levels. 
-  No unsightly oil spills. 
-  No hazardous oil vapours.

		Units	GXS750	GXS750/2600	GXS750/4200
Peak Pumping Speed		m3h-1 (cfm)	740 (436)	2300 (1354)	3450 (2031)
Ultimate Pressure (without purge)		mbar (Torr)	3x10-3 (2.3x10-3)	5x10-4 (3.8x10-4)
Full Load Power	@ ultimate pressure	kW (hp)	10.0 (13.4)	11.1 (14.9)	11.5 (15.4)
	@ peak pumping load	kW (hp)	37.0 (49.6)	40.0 (53.6)	40.0 (53.6)
Electrical	Supply options	High volt	380-460V 3Ø 50/60Hz
		Low volt	200-230V 3Ø 50/60Hz
	Connection	High volt	Harting Han 100A-F
		Low volt	Harting Han 200A-F
Vacuum Couplings	Inlet		ISO100	ISO160
	Exhaust		NW50
Cooling Water	Supply pressure (max)	bar (psig)	6.9 (100)
	DP across pump (min)	bar (psig)	2 (29)	2.5 (36)
	Flow @ min DP	lmin-1 (gal/min)	10 (2.6)	12 (3.2)
	Temperature	°C (°F)	5-40 (41-104) High Volt variants
			5-30 (41-86) Low Volt variants
	Connection		1/2" BSP Male (R 1/2”)
Purge Gas*	Pressure	bar (psig)	2.5-6.9 (36-100)
	Light Duty	sl/min	12
	Medium Duty	sl/min	18-146
	Connection		Swagelok® Ø ¼” tube with olive
High Flow Purge/ Solvent Flush	Supply pressure	bar (psig)	2.5-6.9 (36-100)
	Control valve connection		Swagelok® Ø 3/8" tube with olive
	Filter connection		½" NPT Female
	Solvent connection		3/8" BSP Male (G 3/8")
Mass		kg (lbs)	640 (1411)	908 (2002)	953 (2101)
Noise (with suitable exhaust pipe)		dB(A)	<70
Operating Temperature		°C (°F)	5-40 (41-104)
Exhaust Back Pressure (MAX)		mbar (psia)	1400 (20)
System IP rating	Standard		31
Lubrication	Type		PFPE Drynert® 25/6
	Volume	l (gal)	2.4 (0.6)	3.1 (0.8)	4.2 (1.1)
Monitoring & Control	Standard	Control	Front panel "Dashboard"
			Serial - RS232
		Monitoring	Ethernet Webserver
	Option	Control	Parallel - MCM MicroTIM
		Control & Monitoring	Profibus DP
			Pump Display Terminal (PDT)
		Monitoring	FabWorks®
*Pump combinations		Light duty	Shaft Seal Purge & High Vac Purge only
		Medium duty	Shaft Seal Purge, High Vac Purge, Inlet Purge, variable Gas Ballast & Exhaust Purge (with Exhaust Pressure Sensor)
		Medium duty +	As Medium duty, plus High Flow Purge / Solvent Flush

* Purge Gas information
Light duty: shaft seal purge only
Medium duty: Shaft seal purge, inlet purge, variable gas ballast & exhaust purge (with exhaust pressure sensor)
Medium duty plus: As Medium duty, plus High Flow Purge / Solvent Flush

(mm)	A	B	C	D	E	F	G	H	J	K	L	M
750/2600	258.5	283.5	657	332	1053	83	261.4	1031	-	1622	517	250
(inches)	A	B	C	D	E	F	G	H	J	K	L	M
750/2600	10.2	11.2	25.9	13.1	41.5	3.8	10.3	40.6	-	63.9	20.4	9.8