yt660z110 - STP-XA2703C VG250

STP-XA2703C VG250

YT660Z110

Overview

The STP-XA2703C turbo pump offers high performance in the process range of high vacuum to 2300 sccm process flow with enhanced throughput for all gases. 

This pump is based on a new platform design offering features to improve thermal management, which enhances performance on harsh processes, increases the maximum process flow capability and reduces the effects of corrosion and deposition. 

The outstanding performance is suited to both light and harsh applications, such as semiconductor etch, implant, lithography and LCD processes.

Technology

Edwards is a leader in clean and dry vacuum technology. The first STP pumps were sold in 1983 and there are now over 120,000 installations worldwide. 85% are operating on semiconductor process tools where they demonstrate exceptional levels of reliability. STP pumps are the first choice for applications demanding high up-time, hydrocarbon-free pump­ing, minimal maintenance and low vibration.
 
  • Proven reliability.
  • Clean oil-free high vacuum.
  • Complete range from 300 to 4500 l s-1.
  • Application specific models.
  • Very low noise and vibration.
  • Low cost of ownership.
  • Virtually maintenance free.
  • Installation in any orientation.
  • Full remote control interface.
  • Supported globally by Edwards

Proven magnetic bearing technology
 
The rotor is entirely suspended by magnetic bearings so all contact between the rotor and the remainder of the pump is eliminated. As well as giving very low vibration, the elimination of contact means no bearing wear and no requirement for consequent pump maintenance. 
  
Advantage series
 
The new Advantage series of magnetically levitated turbo pumps have been designed to provide the high­est levels of throughput required by the next generation of semiconductor etch and CVD processes. They have been developed, using continuous improvement techniques, from the ultra reliable, high performance H series of products. Their advanced rotor design combined with selection of the best materials has allowed the creation of the next generation of high throughput turbo pump inside the same footprint as many of the existing models. The range contains pumps with through­put speeds from 800 l s-1 to 4500 l s-1.
 
Oil Free
 
All STP turbomolecular pumps are oil free. The use of magnetic bearings eliminates all hydrocarbon lubricants ensuring no contamination of the vacuum process from the turbomolecular pump. This feature is vital in the semiconductor industry (where device densities are constantly increasing) and in surface science or high energy physics applications (where even minute degrees of contamination disrupt measurements).
 
Maintenance free
 
Unlike conventional mechanical bearings, magnetic levitation means there is no frictional contact, eliminating sources of wear and vibration. This feature enables STP turbomolecular pumps to run for years with virtually no maintenance, reducing annual operating costs to a minimum and ensuring maximum up-time is achieved. This maintenance free feature can be particularly beneficial on processes producing chemical or radioactive contamination.
 
Vibration free
 
Magnetic levitation of the rotor results in an extremely low level of noise and vibration. Peak-to-peak vibration level is less than 0.02 µm. This amplitude remains constant throughout the life of the pump and is free from troublesome sub-harmonics
 
Automatic balancing system (ABS)
 
ABS is a unique patented devel­opment of 5-axis technology. If any rotor imbalance is introduced (by dep­osition of process by-products, for example), sensors in the pump detect changes in the rotor motion and compensate the magnetic bearing fields to allow the rotor to spin on its natural inertial axis. This minimizes the vibration transmitted to the inlet flange. ABS works at all pump rotational speeds.
 
Safety backup bearings
 
STP pumps have dry lubricated axial and radial mechanical bearings as safety backup bearings. These support the rotor and protect the pump in the event of a total disruption of magnetic sus­pension or a massive air inrush which overcomes the magnetic bearing stiffness. These high precision ball bearings are dry lubricated and are not in contact with the rotor during normal operation. 
  
Advanced series compound rotors
 
The advanced series pumps have a redesigned compound rotor, the materials of manufacture have been improved to reduce the clearances within the pump, the rotors have an advanced 3D design and the Holweck stage has been redesigned to increase the throughput.
 
Corrosion resistant
 
To ensure a high level of resistance to corrosion, the corrosion resistant (C) and high throughput (H-C) pumps have nickel coated rotors/stators and pump inter­nals suitable for ion implantation and plasma etching. Further enhanced levels of protection are available on request.
 
Nitrogen purging
 
The corrosion resistant (C) pumps and the high throughput (H-C) pumps have a nitrogen purge facility, a constant flow of nitrogen through the pump dilutes corrosive gases minimizing their damage to the pumps motor and sensor coils.
 
TMS system
 
The Edwards Temperature Management System is available on a wide range of turbo pumps. It is designed to optimize the temperature within the pump, dramat­ically reducing the particle condensation within. This will not only considerably enhance the performance of the pump under harsh process conditions, but also increase its operational life.

Applications

  • Plasma etch (chlorine, fluorine and bromine chemistries) for metal (aluminum), tungsten and dielectric (oxide) and polysilicon
  • Electron cyclotron resonance (ECR) etch
  • Film deposition CVD, PECVD, ECRCVD, MOCVD
  • Sputtering
  • Ion implantation source, beam line pumping end station
  • MBE
  • Diffusion
  • Photo resist stripping
  • Crystal/epitaxial growth
  • Wafer inspection
  • Load lock chambers
  • Scientific instruments: surface analysis, mass spectrometry, electron microscopy
  • High energy physics: beam lines, accelerators
  • Radioactive applications: fusion systems, cyclotrons

Features and Benefits

Advanced rotor design  
  • Increased H2, N2 and Ar performance
  • Improved performance in the process pressure range of high vacuum to 2300 sccm
  • Maintenance free
5-axis magnetic suspension system  
  • Zero contamination
  • Low vibration
Innovative torque management  
  • Patented torque reduction mechanism
Optimized temperature management  
  • High temperature TMS capability
  • Low deposition
  • Built-in cooling mechanism
  • Higher gas throughput heated and unheated
  • Optimized life
  • Harsh process compatible
Certifications  
  • SEMI® compliant, CE Marked and UL Listed

Technical Data

Inlet flange VG250
Pumping Speed
  N2 2650 ls-1
  H2 2050 ls-1
Compression ratio
  N2 >108
  H2 >6 x 103
Ultimate pressure 10-7 Pa
Max allowable backing pressure 266 Pa
Max allowable gas flow
N2 (water cooled) 2300 sccm

(3.8 Pam3s-1)
Ar (water cooled) 1900 sccm

(3.2 Pam3s-1)
Rated speed 27500 rpm
Starting time 8 min
Mounting position Any orientation
Water cooling Flow 3 lmin-1
Water cooling Temperature 5-25 °C (41-77 °F)
Pressure 0.3 MPa
Recommended purge gas flow 50 sccm (8.4 x 10-2 Pam3s-1)
Input voltage 200 to 240 V a.c. (± 10)
Power consumption 1.5 kVA
Pump weight 75 kg (165 lb)
Controller weight 12 kg (26.4 lb)

Performance

1. 2650 ls-1  N2 2. 2300 ls-1  Ar 3. 2050 ls-1  H2

Dimensions1


VG250 ISO250F ICF305 (DN250CF)
A 350 (13.8) 335 (13.2) 305 (12.0)
*B 15 (0.6) 15 (0.6) 28 (1.1)
*C 454 (17.9) 454 (17.9) 459 (18.1)
*D 409 (16.1) 409 (16.1) 414 (16.3)
*E 377.5 (14.9) 377.5 (14.9) 383 (15.1)
*F 319 (12.6) 319 (12.6) 325 (12.8)
*G 262 (10.3) 262 (10.3) 267 (10.5)
*H 379.5 (14.9) 379.5 (14.9) 385 (15.2)
*J 387 (15.2) 387 (15.2) 393 (15.5)


mm (inch)

A
Temperature management system (TMS) sensor
B TMS Heater (TMS spec only)
C TMS heater cover (TMS spec only)
D Outlet port KF40
E Cooling water port Rc 1/4 ISO
F Purge port KF10
b75030010 - STP straight connection cable, 5m

STP straight connection cable, 5m

B75030010
Downloading pricing...
List Price:
Web Price:
Please contact customer care for pricing
b75030020 - Type C Power Cable 5M

Type C Power Cable 5M

B75030020
Downloading pricing...
List Price:
Web Price:
Please contact customer care for pricing
b75030040 - STP straight connection cable, 10m

STP straight connection cable, 10m

B75030040
Downloading pricing...
List Price:
Web Price:
Please contact customer care for pricing
pt35y0a00 - Power Cable 10M, ring terminal

Power Cable 10M, ring terminal

PT35Y0A00
Downloading pricing...
List Price:
Web Price:
Please contact customer care for pricing
yt76z0z00 - SCU-1600 Turbo Pump Control Unit

SCU-1600 Turbo Pump Control Unit

YT76Z0Z00
Downloading pricing...
List Price:
Web Price:
Please contact customer care for pricing

Edwards Maglev Turbos and the Environment Brochure

Edwards Maglev Turbos and the Environment Brochure

STP-XA2703C/3203C Turbomolecular Pump Datasheet

STP-XA2703C/3203C Turbomolecular Pump Datasheet