a41953012 - EPX500LE Dry pump 208V No TIM 3/8 water connector

EPX500LE Dry pump 208V No TIM 3/8 water connector

A41953012

Overview

The EPX series uses a unique, patented, single-shaft regenerative/Holweck® stage mechanism that makes them capable of pumping from atmosphere to ultimate pressures of < 1x10-4 mbar or < 1x10-6 mbar depending on model. They are ideal for applications where a better base pressure is required than can be delivered by a typical primary pump and where otherwise a turbomolecular pump and primary pump would be required and also for applications that cycle frequently from atmosphere to low pressures as they can operate continuously at all inlet pressures.

Technology

The EPX pump system operates at pressures between atmospheric and ultimate vacuum, with no lubricating or sealing fluid in the pumping chamber. This ensures a clean pumping system without back-migration of oil or fluid into the system being evacuated.

The stator of the pump and the enclosed motor are cooled by an integrated water cooling circuit. The EPX pump is therefore suitable for applications in cleanroom environments where fan cooling is unacceptable. The cooling water supply and return pipelines are connected to the pump by water connectors (customer specified). Cooling water must be provided commensurate with environmental conditions (humidity and temperature) such that the dewpoint is not reached.

The pump incorporates an EMC supply filter and an inverter drive, which provides and controls the electrical supply to the pump-motor. LEDs on the front cover identify the status of the EPX pump. Motor speed depends on the pressure at the pump inlet. When the pump is started with the inlet pressure at or close to atmospheric pressure, the motor accelerates to a speed which is limited by the current which can be supplied by the inverter drive. As the pressure at the inlet is reduced, the motor speed increases, until it eventually reaches its preset maximum speed. If the pressure at the inlet increases, the motor will slow down again.

The EPX LE series of pumps can be manually operated using the End User Control (EUC) local display and keypad, or remotely using a Pump Display Terminal (PDT), if fitted; it can also be controlled and monitored over the network, which connects to the EPX pump through the Network connector. When the EPX LE series of pumps is controlled via the Tool Interface Module (TIM), the EUC simply monitors the status of the pump.

The EPX pump is compatible with Fabworks 32.

The EPX pump is supported by four vibration isolators.

Pump protection sensors automatically shut down the pump if a fault condition arises.

Applications

  • The EPX series covers a broad range of applications from wafer handling through to medium duty processes.

    The EPX ‘LE’ Series has been designed for use clean duty applications pumping inert gas mixtures, such as loadlock, whereby control is provided by the process tool interface.

Features and Benefits

Compact footprint – the EPX is more compact than the equivalent turbomolecular pump and primary pump combination.
Low cost of ownership – zero routine maintenance with a 5 year service interval.
Unique patent protected pumping mechanism – the EPX can pump down from atmosphere to turbomolecular base pressure and can operate continuously at all inlet pressures. No separate “rough pumping” required.
Ultra clean mechanism – EPX pumps have no grease or oil under vacuum and present no other source of potential contamination.
Extremely reliable – based on field proven IPX technology, the EPX has a MTBFp = 13 years (SEMI E10) with service periods of around every 5 years to maximize the life of the pump.
Water cooled – low environmental heat load
Low noise and vibration – better working environment. Ideal for vibration sensitive environments.

Technical Data

Peak speed 500 m3h-1

295 ft3min-1

8338 l min-1
Ultimate vacuum

<1 x 10-6 mbar

<7 x 10-7 Torr

<1 x 10-4 Pa
Warm-up time (to nominal performance) 30 min
Inlet flange ISO160
Outlet flange NW25
Noise <59 dB(A)
Minimum cooling water flow rate 2 lmin-1
Cooling water temperature 15 – 35 °C
Electrical Supply 200/208 V, 50/60 Hz 3 phase
Power at ultimate 1.4 kW
Rated motor power 3.0 kW
TIM None
Weight 45.2 kg

Performance


1. EPX500 2. EPX180

Dimensions


H = 388 (EPX180) H = 397 (EPX500)

EPX high vacuum dry pumps datasheet

EPX high vacuum dry pumps datasheet